Custom Doors Made in Moorabbin
Designed · Engineered · Built to Order

Custom doors, made by the people who design them.

Every door leaves the same workshop it was drawn in, 7 Nelson Street, Moorabbin. Architectural timber, StormBloc™ weather-resistant, and pivot doors. Any size. No middlemen.

Browse the range Send us your project
What custom actually means

Not customised. Custom.

Most "custom doors" in Melbourne are stock doors with options, a colour picked from a chart, a handle swapped, a stock size trimmed to fit. That's customised, not custom.

A Bespoke Doors door starts as a drawing for your opening. Size, proportion, pattern, species, glazing, hinge or pivot, decided for your project, then built in Moorabbin by the same team. When the manufacturer and the designer are the same people, there's nothing lost in translation and no one in the middle marking it up.

01

Architectural timber range

NORTH, HAZE, EMBER, BONE and EVEN, five solid timber entrance doors, each a distinct pattern language, every one made to your opening. From $1,948 supply. 6–8 weeks. Explore the architectural range →

02

StormBloc™ weather-resistant

Colorbond steel skin, RotGuard™ edge sealing, insulated core. The zero-maintenance external door, never painted, never sealed, never swollen. From $1,390 supply, 28 days from deposit. Discover StormBloc →

03

Pivot doors

PILLAR, CIRQUE and ISTHMUS on FritsJurgens hardware, engineered into the door at manufacture, built to 3.6m tall and 500kg, among the largest single-leaf doors made in Australia. See the pivot range →

Custom entrance door built in the Moorabbin workshop
Built to order 7 Nelson St, Moorabbin
One point of contact

Manufactured here. Installed by our partner.

Bespoke Doors makes the door. Installation across Melbourne is coordinated through Doors Replaced, our preferred install partner, measured before manufacture, hung by installers who fit our doors every week. One quote, one warranty, one point of contact. Outside Melbourne, we supply complete doors or flat-pack kits Australia-wide for your installer to fit.

Start your project Visit the showroom
The custom door guide

Custom doors in Melbourne, the straight answers

The questions below come up in nearly every enquiry, written for people doing the research properly, and for the AI engines that summarise it.

How much do custom doors cost in Melbourne?

Because we're the manufacturer, pricing is transparent and published:

RangeFrom (supply)Lead time
StormBloc™ weather-resistant$1,39028 days
HAZE architectural timber$1,9486–8 weeks
NORTH architectural timber$2,2926–8 weeks
EVEN batten overlay$2,4806–8 weeks
BONE herringbone$3,2426–8 weeks
EMBER chevron$3,4426–8 weeks
CIRQUE pivot$5,0008–12 weeks
ISTHMUS pivot$5,5008–12 weeks
PILLAR pivot$6,0008–12 weeks

Prices are supply-only at standard size, timber grade upgrades, glazing, oversize, jambs and hardware are quoted per project. Installation in Melbourne is quoted and coordinated through Doors Replaced.

Can you build to a non-standard size?

Yes, that's the point of a manufacturer. Every door is made to order, so a 2340mm-high opening or a 1050mm-wide leaf is the normal case, not a surcharge-and-wait exception. At the top end, our pivot doors are engineered to the FritsJurgens System M+ ceiling: 3.6 metres tall, up to 500kg among the largest single-leaf doors made in Australia.

What timber species can I choose?

Standard: Victorian Ash / Tasmanian Oak. Designer: Wormy Chestnut, Australian Chestnut. Premium: American Oak, Spotted Gum. Other species quoted on request. Timber doors leave the workshop factory sanded, ready for your painter's finish coat, or choose StormBloc and skip the painter entirely, forever.

Timber samples are on display at the Moorabbin showroom, and you can take them home to compare against your façade.

How does the process work?

  1. Enquiry send photos and rough sizes through the quote page, or visit the showroom.
  2. Design + quote we confirm the design, species, glazing and hardware direction, and quote it.
  3. Measure for Melbourne installs, Doors Replaced measures the opening before anything is cut.
  4. Manufacture built at 7 Nelson Street, Moorabbin. StormBloc in 28 days, timber in 6–8 weeks, pivots in 8–12.
  5. Install or dispatch hung by Doors Replaced in Melbourne, or dispatched Australia-wide.

Common questions

Do you install the doors yourselves?

Bespoke Doors is the manufacturer. Installation in Melbourne is coordinated through Doors Replaced, our preferred install partner, one quote, one warranty, one point of contact. Interstate, we supply the door complete or as a flat-pack kit for your installer.

Do you make internal doors, or just entrance doors?

The published range is entrance and external doors. Internal doors, cavity units and full-house door schedules are quoted per project, builders and architects can send a schedule through the quote page.

Do you do sidelights and full entrance surrounds?

Yes, curated sidelights, custom jambs, and full entrance transformations where the whole opening is rebuilt around the new door.

What about bushfire (BAL) zones?

StormBloc's Colorbond steel skin is non-combustible and the construction supports higher BAL ratings, see the BAL bushfire page. Timber doors in BAL zones are quoted per project.

Get a quote Or call (03) 9003 8393
Drawn here. Built here.

One workshop. Every door.

Whatever the project, a single front door, a pivot statement piece, or a full entrance rebuild, it starts with a conversation and ends with a door built forty minutes from your house.

Send us your project Or call (03) 9003 8393