Bespoke Doors — Volume XXIV · 2026
Architectural Doors · Designed and Built in Melbourne

Architectural doors, designed and built in Melbourne.

Custom timber entrance doors, pivot systems and engineered external doors — designed and made at our Moorabbin workshop, and installed across Melbourne through our partner, Doors Replaced. One point of contact, one warranty.

Explore our doors Download the catalog ↓
Site measure/ Design & manufacture/ Hardware/ Supply & install

We take care of everything, start to finish — one point of contact, nothing for you to organise.

Or visit the showroom · Saturdays 9 till 3 · Wed–Fri by appointment

— Scroll
— What We Make

Three ranges. One workshop.

Every door we build belongs to one of three families. Each one engineered for what it has to do, finished by hand at 7 Nelson Street.

Architectural timber entrance door — Sorrento
— Range 01
Architectural Timber
Solid timber. Australian and imported hardwoods. Lining board and batten profiles. Available as hinge or pivot.
Oversized pivot door — South Yarra
— Range 02
Pivot & Oversized
Doors up to 3.6m on FritsJurgens systems. EverFrame™ steel reinforcement engineered for the weight, the scale, and the swing.
StormBloc weather-resistant external door — Armadale install
— Range 03
StormBloc™ Weather-Resistant
Colorbond steel skin, RotGuard™ edge sealing, zero maintenance. Twenty-eight days from deposit paid to working door.
— Why We Exist

Most doors aren't built for the conditions they face.

External doors rot because they're built like internal doors. Pivot doors fail because the structure can't handle the weight. Oversized entrances twist and drop because timber alone isn't enough at that scale.

We build doors differently. We control the design, the engineering, and the manufacturing. Every door is made at our workshop at 7 Nelson Street, Moorabbin. We select the materials, we engineer the structure, and we build the door as a complete system.

Nik & Olivia Kulas
Founders · Bespoke Doors
American Oak entrance transformation — Mornington
— Mornington American Oak
— Entrance Transformations

From the front door to the whole entranceway.

When the door is wrong, replacing it is rarely the whole story. The frame is rotted, the sidelights have failed, the threshold has dropped, and the daylight stops at the porch.

We do the door. We do the lot.

The door, we make. The frame, sidelights, hardware and install — coordinated as one job across Melbourne through Doors Replaced, our preferred install partner. One point of contact, one warranty, nothing for you to organise.

See the projects Get a quote
— How We Build

Most companies sell doors. We make them.

There's a difference between selling a door and building one. When you sell, you sell what's available. When you build, you control what goes in, how it's put together, and whether it'll hold up over time. Every door at Bespoke is designed, engineered, and manufactured in-house at our Moorabbin workshop. That's the entire job.

— How It Works

Made, delivered, and installed.

01 — Made

Your door is built by hand in our Moorabbin workshop.

02 — Delivered

Finished, checked, and delivered anywhere in Australia.

03 — Installed

Across Melbourne, fitted by our install partner Doors Replaced — measured, hung, and warranted as one job.

Outside Melbourne? We supply your door Australia-wide for your own builder to hang.

The Bespoke Doors workshop and showroom in Moorabbin
— Showroom & Workshop Moorabbin
— Come and See

See the doors before you choose.

Most doors get picked off a screen. Ours are built to be experienced in person.

Operate working pivot doors on FritsJurgens systems, feel the weight of an oversized entrance, compare timber species side by side, and see how EverFrame™ and StormBloc™ are actually constructed.

Saturdays you can just walk in. Wed–Fri are by appointment — call ahead and we'll have someone ready for you.

Saturday
9am to 3pm — walk in any time, no appointment needed
Wed–Fri
9:30am to 2:30pm — by appointment, call (03) 9003 8393 to book
Where
7 Nelson Street, Moorabbin VIC 3189
Book a showroom visit Or call (03) 9003 8393
— Why Bespoke Doors

Six reasons people choose us, over and over.

01

We don't shy away from difficult doors

Oversized entrances, complex pivot systems, exposed conditions — the jobs other companies avoid are the ones we're built for. If it's difficult, we're probably the right people to talk to.

02

Site measure and solution

We'll organise someone to come out, measure properly, and assess the full situation. The right solution gets worked out based on your actual opening, your conditions, and what you're trying to achieve.

03

Engineered and built to spec

Every door is engineered for its specific application. We don't pull something off a shelf and hope it fits. The door is designed for your opening, your conditions, and your project requirements, then built at our Moorabbin workshop.

04

Built as a complete system

Door, frame, sidelights, threshold, weather sealing — engineered together and built together. Not a door bought separately, then a frame from somewhere else, then sealing strips bought off the shelf. One workshop, one system, one set of tolerances.

05

Start to finish, we look after you

From the first conversation through to the finished entrance, we're across it. We don't hand you a door and wish you luck. We make sure the whole process is handled properly so the end result is what it should be.

06

Doors that make an impact and last

The entrance is one of the most important parts of a home. We build the doors that make the most impact and hold up the longest. Proprietary systems like EverFrame™ steel reinforcement, StormBloc™ weather-resistant, and RotGuard™ edge sealing mean these doors are engineered to perform for years.

— Who We Work With

Direct partnerships across hardware, timber, and pivot technology.

Bellevue ArchitecturalPrincipal FritsJurgens distributor in Australia
FritsJurgensPrecision pivot systems, Netherlands
Porta TimberLining board profiles · CIRQUE & ISTHMUS
City TimberThermory Ignite cladding · Pillar
Specialty timbersAustralian and imported hardwoods
Zanda Architectural HardwareHandles, locks & architectural hardware
N2LOKArchitectural door hardware
— Volume XXIV · 2026
The
Bespoke
Catalog.
48 pages · 31MB PDF
— Download the catalog

Forty-eight pages of doors we make ourselves.

The full Bespoke range — NORTH, HAZE, EMBER, BONE, EVEN, WEAVE, the Pillar and Cirque pivots, and StormBloc™. Sizes, timber species, pricing, and the engineering behind why each door is built the way it is.

Every door photographed at our workshop or installed in real homes across Melbourne. No stock photography, no renders.

Download the catalog ↓ Or browse the range online
— Choosing the right door

Three decisions, three guides.

Most door projects come down to three questions. We've written the honest comparison for each — from the manufacturer that makes both sides of the decision.

— Size + budget

Pivot vs hinged door

Up to 500kg at 3.6m × 3.6m vs standard residential. The cost, size, and architectural-intent decision.

Read the guide →
 — Engineered alternatives

StormBloc vs fibreglass

Real Colorbond steel + sealed edges vs moulded GRP. Engineered for Australian conditions, made in Moorabbin.

Read the guide →
 — Material + maintenance

Composite vs solid timber

Zero maintenance vs warmth + character. Full 20-year cost-of-ownership comparison from the manufacturer of both.

Read the guide →
— For Architects, Designers & Builders

We build to spec, and we work to drawings.

Whether it's a homeowner replacing a front door or an architect speccing an entrance for a new build, the process is the same: we listen, we advise, and we build the right door for the project. Shop drawings before manufacture, engineering consultation on oversized and pivot applications, on call for the spec stage.

Send us your project Or get in touch